key term - Parallel Circuit

Definition

A parallel circuit is an electrical circuit in which components are connected along multiple paths, allowing current to flow through different branches simultaneously. In a parallel circuit, the voltage across each component is the same, while the current through each component can vary.

5 Must Know Facts For Your Next Test

1. In a parallel circuit, the total current is equal to the sum of the currents through each branch.
2. The total resistance of a parallel circuit is less than the resistance of any individual branch.
3. Parallel circuits allow for independent control and operation of individual components, as changes in one branch do not affect the others.
4. Parallel circuits are commonly used in household wiring, where multiple appliances and devices can be powered simultaneously.
5. Parallel circuits are more reliable than series circuits, as the failure of one component does not necessarily cause the entire circuit to fail.

Review Questions

• Explain how the total resistance in a parallel circuit is calculated, and how it differs from the resistance in a series circuit.
  • In a parallel circuit, the total resistance is calculated as the reciprocal of the sum of the reciprocals of the individual resistances. This means that the total resistance in a parallel circuit is always less than the resistance of any individual branch. This is in contrast to a series circuit, where the total resistance is the sum of the individual resistances. The lower total resistance in a parallel circuit allows for higher current flow and more efficient power distribution compared to a series circuit.
• Describe how changes in one branch of a parallel circuit affect the other branches and the overall circuit.
  • In a parallel circuit, changes in one branch do not affect the other branches. For example, if the resistance in one branch increases, the current through that branch will decrease, but the current through the other branches will remain the same. This is because the voltage across each branch is the same, and the current in each branch is determined by the resistance in that branch alone. This independence of the branches is a key advantage of parallel circuits, as it allows for the individual control and operation of components without affecting the overall circuit performance.
• Analyze the relationship between voltage, current, and resistance in a parallel circuit, and explain how this relationship is different from a series circuit.
  • In a parallel circuit, the voltage across each branch is the same, while the current through each branch can vary depending on the resistance in that branch. This is in contrast to a series circuit, where the current is the same throughout the circuit, but the voltage drops across each component are different. The relationship between voltage, current, and resistance in a parallel circuit is governed by Ohm's Law, where the current in each branch is inversely proportional to the resistance in that branch. This allows for more flexible and efficient power distribution in parallel circuits compared to series circuits.

Related terms

Series Circuit:

A series circuit is an electrical circuit in which components are connected end-to-end, forming a single path for the current to flow through.

Resistance:

Resistance is the opposition to the flow of electric current in a circuit, measured in ohms (Ω).

Ohm's Law:

Ohm's Law states that the current through a conductor is directly proportional to the voltage applied across it, and inversely proportional to the resistance of the circuit.